SuitsHeritage Men’s Solid Green Regular Fit 3 Piece Suit

$239.99

Size

Clear

Jacket Measurements
All measurments should be entered in inches

Chest size
Measure around the fullest part of the chest (do not puff up chest) (measure from below the Arm Pits)

Sleeves length
Place tape where sleeve joins body of coat and measure to length desired.

Measuring sleeve length of your existing coat/jacket can help.

Shoulder
Measure from one edge of the shoulder to the other, across back. It is best to measure shoulders of your existing jacket if available.

Jacket Length
Measure from the upper end of the shoulder where it joins the neck to the length required (you might use one of your own jacket).

Bicep
Measure around the fullest part of your bicep.

Stomach
Measure around the widest part of the Stomach.

Pants Length
Measure the length from the waist to the floor or the length you want, you should measure the length while wearing your shoes.
Measuring outer length of your existing pants can help, you should measure it from the top of the waist band to the leg bottom or the length you want.

Waist
Measure the waist area where you want to wear your pants. Make sure the tape is snug, but not pulling tightly, and not too loose.
(Do NOT mention your label size, measure your waist according to the instructions above, readymade pants are always more than their label sizes and vary from brand to brand)

Seat
Measure around the widest part of the Seat.

Front Rise
Measure from the crotch where the inseam meets the front and back seams to the top of the waistband.
Measure with the front laid flat, pull the area to the fullest

Back Rise
Measure from the crotch where the inseam meets the front and back seams to the top of the waistband on the rear.
We will increase/decrease the back rise incase we feel that it seems a bit off or do not come in the range of your other measurements.

Thighs
Determine the widest part of your thigh and measure accordingly.

Knee
Measure around your knee cap, snug, with room for one finger.

Leg opening
Measure from one side to the other side.
You will then multiply this measurement by 2

Jacket Fit
As the name suggests, Slim fit is more fitted than a regular fit Jacket.

Trouser Fit
Classic Comfort Fit:
Pants which are comfortable on the thighs and taper a bit towards the leg opening.
Straight Fit:
On straight fit pants the leg opening is the almost same as your knee measurements.
Slimmer Straight:
Same as straight however more slimmer on the thighs and leg opening.
Baggy:
These are loose on the thighs and knees and then taper a bit towards the leg opening.
Slimmer Tapering:
Tapering towards the leg opening.
The knee and leg opening measurements you give play a crucial part in determining the fit.
*Size

Reset options

Customize your Suits

SuitsHeritage Men’s Solid Green Regular Fit 3 Piece Suit

$239.99

Size

Clear

Jacket Measurements
All measurments should be entered in inches

Chest size
Measure around the fullest part of the chest (do not puff up chest) (measure from below the Arm Pits)

Sleeves length
Place tape where sleeve joins body of coat and measure to length desired.

Measuring sleeve length of your existing coat/jacket can help.

Shoulder
Measure from one edge of the shoulder to the other, across back. It is best to measure shoulders of your existing jacket if available.

Jacket Length
Measure from the upper end of the shoulder where it joins the neck to the length required (you might use one of your own jacket).

Bicep
Measure around the fullest part of your bicep.

Stomach
Measure around the widest part of the Stomach.

Pants Length
Measure the length from the waist to the floor or the length you want, you should measure the length while wearing your shoes.
Measuring outer length of your existing pants can help, you should measure it from the top of the waist band to the leg bottom or the length you want.

Waist
Measure the waist area where you want to wear your pants. Make sure the tape is snug, but not pulling tightly, and not too loose.
(Do NOT mention your label size, measure your waist according to the instructions above, readymade pants are always more than their label sizes and vary from brand to brand)

Seat
Measure around the widest part of the Seat.

Front Rise
Measure from the crotch where the inseam meets the front and back seams to the top of the waistband.
Measure with the front laid flat, pull the area to the fullest

Back Rise
Measure from the crotch where the inseam meets the front and back seams to the top of the waistband on the rear.
We will increase/decrease the back rise incase we feel that it seems a bit off or do not come in the range of your other measurements.

Thighs
Determine the widest part of your thigh and measure accordingly.

Knee
Measure around your knee cap, snug, with room for one finger.

Leg opening
Measure from one side to the other side.
You will then multiply this measurement by 2

Jacket Fit
As the name suggests, Slim fit is more fitted than a regular fit Jacket.

Trouser Fit
Classic Comfort Fit:
Pants which are comfortable on the thighs and taper a bit towards the leg opening.
Straight Fit:
On straight fit pants the leg opening is the almost same as your knee measurements.
Slimmer Straight:
Same as straight however more slimmer on the thighs and leg opening.
Baggy:
These are loose on the thighs and knees and then taper a bit towards the leg opening.
Slimmer Tapering:
Tapering towards the leg opening.
The knee and leg opening measurements you give play a crucial part in determining the fit.
*Size

Reset options

Description

Timeless elegance meets modern craftsmanship with our Signature 3-Piece Suit. Made-to-Measure for a flawless fit, it features a tailored jacket, perfectly balanced waistcoat, and precision-cut trousers — versatile enough for formal occasions or sophisticated everyday wear.

Crafted from premium fabrics and fully customizable through our CUSTOMIZE experience, each suit is produced sustainably, only after your order. More than clothing, it’s a statement of refinement and a reflection of your personal style.

Suit Care

To maintain the quality, structure, and refined fit of your 3-piece suit (Jacket, Trousers, and Waistcoat), follow these essential care practices:

Rotation Is Essential:
Allow your full suit 24–48 hours of rest between wears. This gives the fabric time to recover, prevents shine, and preserves the suit’s overall shape—especially important when all three pieces are worn together.

Use Proper Hangers:

Jacket: Hang on a broad, structured wooden hanger to support the shoulders and maintain the jacket’s silhouette.

Trousers: Hang vertically using clamp hangers from the cuffs or waistband to keep creases sharp.

Waistcoat: Hang on a padded hanger or fold neatly to prevent stretching and distortion.

Steam Instead of Ironing:
Regular steaming removes wrinkles, refreshes the fabric, and maintains the natural drape. Steaming is far gentler than ironing and helps avoid shine marks on wool fabrics.

Dry Clean Sparingly:
Dry clean the complete 3-piece suit only 1–2 times per year, or when heavily soiled. Excessive dry cleaning weakens fibers, fades color, and damages internal structure.

Spot Clean Immediately:
Blot spills gently with a clean cloth—never rub. Prompt spot treatment prevents stains from setting and reduces the need for frequent dry cleaning.

Store with Space:
Ensure each piece has enough room in your wardrobe. Crowding can crush shoulders, crease trousers, and warp the waistcoat.

Avoid Overloading Pockets:
Keeping heavy items in pockets can distort the fabric and compromise the tailored fit over time.

Additional Notes

Tie , Pocket Square and Bow Tie are sold separately.

Handcrafted Just for You | Delivery Time: 2-3 Weeks

Subject to confirmed measurement inputs and stock availability. Also ordering other products together which do not specify delivery dates may delay shipping.

Custom Made

Each garment is individually Custom Tailored by our team of expert Master Tailors and Skilled Craftsmen from the fabric stage. Same return policy applies to Ready Sizes as they too are custom made for you.